Section "ServerLayout"
	Identifier     "XFree86 Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/local/X11R6.4/lib/X11/rgb"
	ModulePath   "/usr/local/X11R6.4/lib/modules"
	FontPath     "/usr/local/X11R6.4/lib/X11/fonts/misc/"
	FontPath     "/usr/local/X11R6.4/lib/X11/fonts/Speedo/"
	FontPath     "/usr/local/X11R6.4/lib/X11/fonts/Type1/"
	FontPath     "/usr/local/X11R6.4/lib/X11/fonts/CID/"
	FontPath     "/usr/local/X11R6.4/lib/X11/fonts/75dpi/"
	FontPath     "/usr/local/X11R6.4/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
	Load  "extmod"
	Load  "xie"
	Load  "xtt"
	Load  "type1"
	Load  "pex5"
	Load  "glx"
	Load  "dri"
	Load  "GLcore"
	Load  "dbe"
	Load  "record"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "keyboard"
	Option      "XkbRules"      "xfree86"
	Option      "XkbModel"      "pc101"
	Option      "XkbLayout"     "us"
	Option      "XkbOptions"    "ctrl:nocaps"
	Option      "AutoRepeat"    "200 15"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option      "Protocol" "auto"
	Option      "Device" "/dev/sysmouse"
	Option      "Buttons" "5"
	Option      "ZAxisMapping"  "4 5"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
#	HorizSync       31.5-37.9
#	VertRefresh     55-90
#	Modeline "800x600" 35.795 800 824 896 954  600 601 603 625
	HorizSync   31.5-48.5
	VertRefresh 45-90
###	Modeline  "800x600"    50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
###	Modeline  "800x600"    40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
#	VertRefresh 60-78
#	HorizSync   31.5-60.0
EndSection

Section "Device"
	### Available Driver options are:-
        #Option     "pci_burst"
        #Option     "fifo_conservative"
        #Option     "fifo_moderate"
        #Option     "fifo_aggressive"
        #Option     "pci_retry"
        #Option     "NoAccel"
        #Option     "set_mclk"
        #Option     "show_cache"
        #Option     "HWCursor"
        Option     "SWCursor"
        #Option     "ShadowFB"
        #Option     "Rotate"
        #Option     "VideoKey"
        #Option     "ByteSwap"
        #Option     "UseBIOS"
	Identifier  "Card0"
	Driver      "siliconmotion"
	VendorName  "Silicon Motion Inc."
	BoardName   "LynxEM+"
#	DacSpeed        135
#	VideoRam        2048
	BusID       "PCI:0:9:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultDepth 16
	SubSection "Display"
		Depth     8
		Modes   "800x600"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes   "800x600"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes   "800x600"
	EndSubSection
EndSection

Section "DRI"
EndSection